Gigabit PoE Media Converter | OmniConverter GPoE/SE Gigabit PoE Media Converter | OmniConverter GPoE/SE SFPs not included
OmniConverter® GPoEBT/S

10/100/1000 Media Converter with Power over Ethernet (60W and 100W) PoE Enhanced Version*



Features


  • IEEE 802.3bt 60W and 100W multi-port Gigabit Media Converter
  • Compact size
  • Dual Device mode for operating as two separate media converters
  • Directed Switch mode prevents flooding of multicast video traffic
  • Configurable PoE Power Reset
  • Uplink redundancy on models with two uplink ports
  • Two SFP or two 10/100/1000 RJ-45 uplink ports
  • Supports 10/100/1000 and 1G copper SFP transceivers
  • Supports 100Mbps and 1000Mbps fiber SFPs
  • One ST or SC fixed Gigabit fiber connectors
  • One or two 10/100/1000 RJ-45 PoE/PoE+ user ports
  • Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support




Description


The OmniConverter GPoEBT/S are multi-port IEEE 802.3abt 60 and 100 watt PoE Ethernet media converters that feature one or two uplink ports and one or two 10/100/1000 RJ-45 PoE user ports.

The GPoEBT/S provides up to 100W PoE per RJ-45 user port and supports frame sizes up to 10,240 bytes. The uplink ports can be fixed fiber or SFP receptacle or 10/100/1000 RJ-45 copper ports.

The GPoEBT/S supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing the multicast video traffic from flooding other network ports.

Models with two fiber port support redundant fiber uplinks for critical applications that require protection and restoration in the event of a fiber failure. The second fiber port can also be used to cascade multiple media converters.

Models with two fiber ports also support Dual Device mode that enables the module to operate as two independent and isolated Ethernet media converters. In Dual Device mode, the GPoEBT/S provides separate and independent data traffic paths between the two uplink ports and two user ports.

Configurable features include link modes and a PoE power reset function that enables the attached PD device, such as a camera or access point, to be re-initialized remotely, eliminating the need for costly truck rolls to remote PD sites. When a problem with a PD is detected, the fiber port on the module can be disconnected, triggering the PoE power reset function.

Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages.

The module support fixed-fiber connectors and 100Mbps or 1000Mbps SFP transceiver receptacles, enabling easy adaptability to different fiber types, distances and wavelengths. The media converters also support 10/100/1000 SGMII or 1Gbps SERDES copper transceivers and 100Mbps and 1000Mbps standard, CWDM and DWDM fiber transceivers in a variety of distances and fiber types.

The GPoEBT/S can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19” rack-mount shelf. They are available with DC input power via terminal connectors or an external 100 to 240V AC power adapters.





Examples


Security and Wireless

In this application example, outdoor IP surveillance cameras and Wireless Access Points are installed throughout a large facility. A network switch with fiber ports is used to distribute a fiber link from a control room to a OmniConverter media converter with dual fiber ports. The second fiber port on the OmniConverter is used to daisy-chain the fiber to the next location, where an OmniConverter media converter with one fiber port terminates the fiber.

The OmniConverter media converters provide Power over Ethernet (PoE) over UTP cables to an IP camera and Wireless Access Point at each location, each of which can be located up to 100 meters from the media converter.

For 60W or 100W PoE devices, such as cameras with heaters/blowers or pan/tilt/zoom motors, the GPoEBT/S can be used for devices that require up to 100W.

Ceiling Application BT GHPoEBT S

Small Cell

In this application example, High-Power small cell devices are deployed inside several buildings. A network switch with fiber ports is used to distribute a fiber link to OmniConverter media converters.

The OmniConverter GPoEBT/S media converters are capable of providing up to 100 watts on the RJ-45 ports.

 

Product GHPoE BT Small Cell





Specifications


Description OmniConverter GHPoEBT/S
10/100/1000BASE-T to 1000BASE-X or 100BASE-X Fiber Media Converter with 60W or 100W
Standard Compliances

IEEE 802.3,

IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max), IEEE 802.3bt (60 and 100 watts max)

Regulatory Compliances

(Pending)

Safety: UL 62368-1, UL 60950-1,

            IEC 62368-1, IEC 60950-1,

            EN 62368-1, EN 60950-1,

            CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

            CE Mark, UKCA

EMC:   EN 55032/24 CE Emissions/Immunity,

            IEC 61000-6-4 Industrial Emissions,

            IEC 61000-6-2 Industrial Immunity

EMI:     CISPR 32,

             FCC 47 Part 15 Subpart B Class A

EMS:    IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

            IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m,

            IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models),

            IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),

            IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models),

            IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models),

            IEC 61000-4-6 CS: Signal: 10 V,

            IEC 61000-4-8 (Magnetic Field) 30A/m,

            IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: IP30D Protection

ACT: TAA, BAA,NDAA

Environmental RoHS, WEEE, REACH
PoE Power Modes IEEE Alterative A (Alt A) and 4 pair
Frame Size Up to 10,240 bytes
Port Types 

Copper: 10/100/1000BASE-T (RJ-45)

Fiber:     100BASE-X (SFP)

              1000BASE-X (ST, SC, LC, SFP)

              10/100/1000 SGMII (RJ-45 SFP)

              1G SERDES (RJ-45 SFP)

Cable Types

Copper: EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber:     Multimode: 50/125, 62.5/125µm

               Single-mode: 9/125µm

AC Power Requirements
(Models with AC/DC Adapters)

60W Model - 1 RJ-45 Port

100 - 240VAC/50 - 60Hz, 0.61A @ 120VAC (typical)

100W Model - 1 RJ-45 Port

100 - 240VAC/50 - 60Hz, 0.99A @ 120VAC (typical)

60W Model - 2 RJ-45 Ports

100 - 240VAC/50 - 60Hz, 1.18A @ 120VAC (typical)

100W Model - 2 RJ-45 Ports

100 - 240VAC/50 - 60Hz, 1.94A @ 120VAC (typical)

DC Power Requirements
(Models with DC Terminals)

60W Model - 1 RJ-45 Port

+/-46 to +/-57VDC, 1.15A @ 56VDC

2 Pin Terminal (isolated)

100W Model - 1 RJ-45 Port

+/-46 to +/-57VDC, 1.88A @ 56VDC

2 Pin Terminal (isolated)

60W Model - 2 RJ-45 Ports

+/-46 to +/-57VDC, 2.23A @ 56VDC

2 Pin Terminal (isolated)

100W Model - 2 RJ-45 Ports

+/-46 to +/-57VDC, 3.67A @ 56VDC

2 Pin Terminal (isolated)

Dimensions (W x D x H) 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm)
Weight

Module Only: 1.0 lbs.; 453.6 grams

Module w/ Adapter: 1.8 lbs.; 816.4grams

Operating Temperature*

Commercial: 0 to 50°C

Wide:         -40 to 60°C (-20°C AC cold start)

Extended:  -40 to 75°C (-20°C AC cold start)

Storage:     -40 to 80°C

Humidity 5% to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs)

Module Only: 584,000

AC/DC Adapter: 100,000

Warranty Lifetime warranty with 24/7/365 free Technical Support




Ordering


The previous/old version of the GHPoEBT/S 60W are no longer in production. GHPoEBT/S models 9500B - 9519B are replaced with the enhanced models below.

 

Step 1: Choose a Base Part Number (xxxxN-x-ypt)

OmniConverter GPoEBT/S IEEE 802.3bt 60W Models
Fiber TypeDistanceConnector Type

Tx / Rx

Lambda (nm)

Min. Tx

Power (dBm)

Max. Tx

Power (dBm)

Min. Rx

Power (dBm)

Max.

Rx Power (dBm)

Min

Attenuation (dB)

Link

Budget (dB)

STSCSFPRJ-45
MM 220/550m1 9500N-0-ypt 9502N-0-ypt - - 850/850 -10 -4 -17 -3 - 7
MM/DF (x2) 220/550m1  -  - - - 850/850 -10 -4 -17 -3 - 7
SM/DF 12km 9501N-1-ypt 9503N-1-ypt - - 1310/1310 -9.5 -3 -19.5 -3 - 10
SM/DF (x2) 12km - - - - 1310/1310 -9.5 -3 -19.5 -3 - 10
SM/DF 34km 9501N-2-ypt 9503N-2-ypt - - 1310/1310 -5 0 -23 -3 3 18
SM/DF 80km - 9503N-3-ypt - - 1550/1550 -5 0 -23 -3 3 18
SM/DF 110km - 9503N-4-ypt - - 1550/1550 0 5 -24 -3 8 24
SM/DF 140km - 9503N-5-ypt - - 1550/1550 2 5 -28 -8 13 30
MM-SF2 550m - 9510N-0-ypt - - 1310/1550 -9 -3 -18 -3 - 9
MM-SF2 550m - 9511N-0-ypt - - 1550/1310 -9 -3 -18 -3 - 9
SM-SF2 20km - 9510N-1-ypt - - 1310/1550 -9.5 -3 -20 -3 - 10.5
SM-SF2 20km - 9511N-1-ypt - - 1550/1310 -9.5 -3 -20 -3 - 10.5
SM-SF2 40km - 9510N-2-ypt - - 1310/1550 -3 0 -20 -3 3 17
SM-SF2 40km - 9511N-2-ypt - - 1550/1310 -3 0 -20 -3 3 17
RJ-45 (x1) - - - - 9518N-0-ypt - - - - - - -
RJ-45 (x2) -  -  - - 9518N-1-ypt - - - - - - -
SFP(x1) - - - 9519N-0-ypt - - - - - - - -
SFP(x2) - - - 9519N-1-ypt - - - - - - - -
62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m.
When using single-fiber (SF) models, the Tx wavelength on one end has to match the Rx wavelength on the other.
MM = Multimode, SM = Single-mode, DF = Dual Fiber, SF = Single-fiber
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Optical Transceivers web page.
Contact Omnitron for conformal coating options.

Step 2: Choose the number of RJ-45 ports (xxxxN-x-ypt)

1 = One RJ-45 Ports
2 = Two RJ-45 Ports

Step 3: Choose a Power Option (xxxxN-x-ypt)

1 = External AC/DC Adapter, 100 - 240 VAC included, with US Power Cord
2 = External AC/DC Adapter, 100 - 240 VAC included, No Power Cord
8 = External AC/DC Adapter, 100 - 240 VAC included, PS JET/PSE Certified, with Japanese Power Cord
9 = Direct DC 2 pin terminal connector, no AC/DC power adapter
See AC/DC Adapter Temperature table below when ordering AC Powered models (power option 1, 2 or 8)

Step 4: Choose an Operating Temperature Range (xxxxN-x-ypt)

<leave blank> = Commercial temperature (0 to 50°C)
W = Wide temperature (-40 to 60°C) - Check table for available wattage for models with AC/DC Power Adapter
Z = Extended temperature (-40 to 75°C) - Check table for available wattage for models with AC/DC Power Adapter

 

AC/DC Adapter Temperature - Total Available Wattage to RJ-45 Ports
Model RJ-45 Ports Watts Required

Watts Available

@40°C

Watts Available

@50°C

Watts Available

@60°C

Watts Available

@70°C

Watts Available

@75°C

GHPoEBT/S 60 watts 1 60 watts Full Power Full Power Full Power Full Power 50 watts
2 120 watts Full Power Full Power Full Power 60 watts 50 watts
 
 
 

The previous/old version of the GHPoEBT/S 100W are no longer in production. GHPoEBT/S models 9150B - 9169B are replaced with the enhanced models below.

 

Step 1: Choose a Base Part Number (xxxxN-x-ypt)

OmniConverter GPoEBT/S IEEE 802.3bt 100W Models
Fiber TypeDistanceConnector Type

Tx / Rx

Lambda (nm)

Min. Tx

Power (dBm)

Max. Tx

Power (dBm)

Min. Rx

Power (dBm)

Max.

Rx Power (dBm)

Min

Attenuation (dB)

Link

Budget (dB)

STSCSFPRJ-45
MM/DF 220/550m1 9150N-0-ypt 9152N-0-ypt - - 850/850 -10 -4 -17 -3 - 7
MM/DF (x2) 220/550m1 - - - - 850/850 -10 -4 -17 -3 - 7
SM/DF 12km 9151N-1-ypt 9153N-1-ypt - - 1310/1310 -9.5 -3 -19.5 -3 - 10
SM/DF (x2) 12km  - - - 1310/1310 -9.5 -3 -19.5 -3 - 10
SM/DF 34km 9151N-2-ypt 9153N-2-ypt - - 1310/1310 -5 0 -23 -3 3 18
SM/DF 80km - 9153N-3-ypt - - 1550/1550 -5 0 -23 -3 3 18
SM/DF 110km - 9153N-4-ypt - - 1550/1550 0 5 -24 -3 8 24
SM/DF 140km - 9153N-5-ypt - - 1550/1550 2 5 -28 -8 13 30
MM-SF2 550m - 9160N-0-ypt - - 1310/1550 -9 -3 -18 -3 - 9
MM-SF2 550m - 9161N-0-ypt - - 1550/1310 -9 -3 -18 -3 - 9
SM-SF2 20km - 9160N-1-ypt - - 1310/1550 -9.5 -3 -20 -3 - 10.5
SM-SF2 20km - 9161N-1-ypt - - 1550/1310 -9.5 -3 -20 -3 - 10.5
SM-SF2 40km - 9160N-2-ypt - - 1310/1550 -3 0 -20 -3 3 17
SM-SF2 40km - 9161N-2-ypt - - 1550/1310 -3 0 -20 -3 3 17
SFP(x1) - - - - 9168N-0-ypt - - - - - - -
SFP(x2) - - - - 9168N-1-ypt - - - - - - -
SFP(x1) - - - 9169N-0-ypt - - - - - - - -
SFP(x2) - - - 9169N-1-ypt - - - - - - - -
62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m.
When using single-fiber (SF) models, the Tx wavelength on one end has to match the Rx wavelength on the other.
MM = Multimode, SM = Single-mode, DF = Dual Fiber, SF = Single-fiber
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Optical Transceivers web page.
Contact Omnitron for conformal coating options.

Step 2: Choose the number of RJ-45 ports (xxxxN-x-ypt)

1 = One RJ-45 Ports
2 = Two RJ-45 Ports

Step 3: Choose a Power Option (xxxxN-x-ypt)

1 = External AC/DC Adapter, 100 - 240 VAC included, with US Power Cord
2 = External AC/DC Adapter, 100 - 240 VAC included, No Power Cord
8 = External AC/DC Adapter, 100 - 240 VAC included, PS JET/PSE Certified, with Japanese Power Cord
9 = Direct DC 2 pin terminal connector, no AC/DC power adapter
See AC/DC Adapter Temperature table below when ordering AC Powered models (power option 1, 2 or 8)

Step 4: Choose an Operating Temperature Range (xxxxN-x-ypt)

<leave blank> = Commercial temperature (0 to 50°C)
W = Wide temperature (-40 to 60°C) - Check table for available wattage for models with AC/DC Power Adapter
Z = Extended temperature (-40 to 75°C) - Check table for available wattage for models with AC/DC Power Adapter

 

AC/DC Adapter Temperature - Total Available Wattage to RJ-45 Ports
Model RJ-45 Ports Watts Required 40°C 50°C 60°C 70°C 75°C
GHPoEBT/S 100watts 1 100 watts Full Power Full Power Full Power No AC Model Available
2 200 watts Full Power Full Power 165 watts No AC Model Available
 
 
 

Accessories

Model NumberDescription
 8250-0  DIN-Rail Mounting Kit
 8251-0 DIN Rail Mounting Clip
 8260-0 1U Rack Mount Shelf

 

 

*MODEL COMPARISON

Previous/Old Base Model #Previous/Old Model Enhanced Base Model #Enhanced Model
9500B GHPoEBT/S 60 W per RJ-45 User Port 9500N GPoEBT/S 60 W per RJ-45 User Port
9160B GHPoEBT/S 100 W per RJ-45 User Port 9160N GPoEBT/S 100 W per RJ-45 User Port

 

Features

Previous/Old Model

GHPoEBT/S and GHPoEBT/S

Enhanced Model

GPoEBT/S

Benefits
Copper Uplink Ports N/A One or two ports Product flexibility
RJ-45 SFP Support

N/A

10/100/1000 SGMII

1G SERDES

Allows for multiple SFP transceiver options
Dimensions (W x D x H)

4.5” x 6.0” x 1.0”

3.8” x 4.8” x 1.0” Compact size
Dual Device Mode

N/A

Models with dual uplink ports Two independent and isolated Ethernet media converters
Directed Switch Mode

N/A

Prevents multicast (video) traffic from flooding other network ports
Legacy pre-IEEE Power Standards

Alternative A and 4 pair Power Mode

No configuration for the user
IP Protection

IP20

IP30D Provides increased enclosure protection