Managed Industrial Multi-Gigabit/Multi-Rate 100M, 1G, 2.5G, 5G, 10G PoE Ethernet Switch

• Managed Industrial 10G multi-gigabit/multi-rate PoE Ethernet Switch
• One SFP/SFP+ transceiver uplink port or multi-gigabit/multi-rate copper port
• SFP/SFP+ uplink port supports copper and fiber transceivers
• Multi-gigabit/multi-rate ports supports speeds of 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps
• Two multi-gigabit/multi-rate RJ-45 PoE and two 10/100/1000 RJ-45 PoE downlink/access ports
• Models support IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt (60W and 100W)
• Supports jumbo frames up to 10,240 bytes
• Heartbeat signal to verify connectivity to the PD
• Configurable PoE Power Reset
• PoE power management with LLDP MED and MDI TLV, and PoE Power Multi-Day Scheduler
• Management via IPv4, IPv6, Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
• Easy to use Hierarchical Command Line Interface
• SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
• AC to DC Power Adapter or 2-Pin DC terminal
• Wall, Rack and DIN-rail mountable
• Industrial (-40 to 75º C) operating temperature
• TAA, BAA and NDAA compliant, and Made in the USA
• Free 24/7/365 Technical Support

ADDITIONAL FEATURES

• IEEE 802.1x, RADIUS, TACACS+ and ACL
• Email Notification
• Directed Switch mode AKA Camera mode to prevent port flooding
• IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
• DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
• IEEE 802.1ab Link Layer Discovery Protocol
• Rate Limiting, Queue prioritization and Class of Service
• IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
• Broadcast / Multicast / Unicast Storm Prevention
• Static MAC configuration and blocking of unknown Unicast/Multicast addresses
• SNTP / NTP and time of day

The RuggedNet 10GMGPoE+/Mi and 10GMGPoEBT/Mi are managed industrial multi-gigabit Ethernet switches featuring one 1/10G SFP/SFP+ or multi-gigabit/multi-rate RJ-45 uplink port with two multi-gigabit/multi-rate RJ-45 and two 10/100/1000 RJ-45 Power-over-Ethernet downlink/access ports. They support PoE, PoE+ and PoEBT up to 100 watts depending on the model.

The RJ-45 user ports support multi-gigabit/multi-rate speeds of 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps. The 10GMGPoE+/Mi supports IEEE 802.3at (15 and 30W) and the 10GMGPoEBT/Mi supports IEEE 802.3bt (60 and 100W) per user port depending on the model.

The RuggedNet switches feature a Small Form Pluggable (SFP) transceiver receptacle port supporting a variety of copper and fiber transceivers. It supports 10/100/1000BASE-T, 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T copper transceivers and 1G and 10G multimode or single-mode fiber, dual or single-fiber transceivers in standard, CWDM and DWDM wavelengths.

All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided.

The switches feature a Remote PoE Power Reset function that enables the user to remotely power-cycle and reset each PD. They also feature a configurable Heartbeat Reset function that automatically pings the attached PDs and automatically power cycles and resets the PDs when detecting a heartbeat loss.

An alarm relay is available to detect user configured events. The relay contact can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.

All models can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with dual DC input power.

Security and Wireless

In this application example, outdoor IP surveillance cameras and Wi-Fi 6/6E Access Points are installed throughout a large facility. An iConverter® XM5 aggregation fiber switch is used to distribute a fiber link from a control room to RuggedNet switches with a fiber SFP port.

The RuggedNet 10GMGPoEBT/Mi provides a managed solution with up to 100W of Power-over-Ethernet (PoE) to an IP camera and Wireless Access Point at each location, each of which can be located up to 100 meters from the switches.

When less power is required the RuggedNet 10GMGPoE+/Mi can be used to deliver 30 watt of power per port.

The camera and access point have full bandwidth capability utilizing the 10G fiber uplink port on each 10GMGPoEBT/Mi switch.

Small Cell

Small cell devices are increasing their demand on both power and bandwidth requirements. Speeds of 10Gbps and 100W is common with today’s small cell devices.

In this application example, high-speed small cell devices requiring up to 10Gbps bandwidth are deployed inside several buildings. An iConverter® XM5 aggregation fiber switch is used to distribute a fiber link to each RuggedNet switch.

The RuggedNet 10GMGPoEBT/Mi switches provides a managed solution with up to 100 watts and speeds up to 10Gbps on the RJ-45 user ports.

Power / Voltage Requirements and Specifications