10/100/1000 Media Converter with Power over Ethernet (60W and 100W) PoE Enhanced Version*

• IEEE 802.3bt 60W and 100W multi-port Gigabit Media Converter
• Compact size
• Dual Device mode for operating as two separate media converters
• Directed Switch mode prevents flooding of multicast video traffic
• Configurable PoE Power Reset
• Uplink redundancy on models with two uplink ports
• Two SFP or two 10/100/1000 RJ-45 uplink ports
• Supports 10/100/1000 and 1G copper SFP transceivers
• Supports 100Mbps and 1000Mbps fiber SFPs
• One ST or SC fixed Gigabit fiber connectors
• One or two 10/100/1000 RJ-45 PoE/PoE+ user ports
• Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
• TAA, BAA and NDAA compliant, and Made in the USA
• Lifetime Warranty and free 24/7 Technical Support

The OmniConverter GPoEBT/S are multi-port IEEE 802.3abt 60 and 100 watt PoE Ethernet media converters that feature one or two uplink ports and one or two 10/100/1000 RJ-45 PoE user ports.

The GPoEBT/S provides up to 100W PoE per RJ-45 user port and supports frame sizes up to 10,240 bytes. The uplink ports can be fixed fiber or SFP receptacle or 10/100/1000 RJ-45 copper ports.

The GPoEBT/S supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing the multicast video traffic from flooding other network ports.

Models with two fiber port support redundant fiber uplinks for critical applications that require protection and restoration in the event of a fiber failure. The second fiber port can also be used to cascade multiple media converters.

Models with two fiber ports also support Dual Device mode that enables the module to operate as two independent and isolated Ethernet media converters. In Dual Device mode, the GPoEBT/S provides separate and independent data traffic paths between the two uplink ports and two user ports.

Configurable features include link modes and a PoE power reset function that enables the attached PD device, such as a camera or access point, to be re-initialized remotely, eliminating the need for costly truck rolls to remote PD sites. When a problem with a PD is detected, the fiber port on the module can be disconnected, triggering the PoE power reset function.

Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages.

The module support fixed-fiber connectors and 100Mbps or 1000Mbps SFP transceiver receptacles, enabling easy adaptability to different fiber types, distances and wavelengths. The media converters also support 10/100/1000 SGMII or 1Gbps SERDES copper transceivers and 100Mbps and 1000Mbps standard, CWDM and DWDM fiber transceivers in a variety of distances and fiber types.

The GPoEBT/S can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19” rack-mount shelf. They are available with DC input power via terminal connectors or an external 100 to 240V AC power adapters.

Security and Wireless

In this application example, outdoor IP surveillance cameras and Wireless Access Points are installed throughout a large facility. A network switch with fiber ports is used to distribute a fiber link from a control room to a OmniConverter media converter with dual fiber ports. The second fiber port on the OmniConverter is used to daisy-chain the fiber to the next location, where an OmniConverter media converter with one fiber port terminates the fiber.

The OmniConverter media converters provide Power over Ethernet (PoE) over UTP cables to an IP camera and Wireless Access Point at each location, each of which can be located up to 100 meters from the media converter.

For 60W or 100W PoE devices, such as cameras with heaters/blowers or pan/tilt/zoom motors, the GPoEBT/S can be used for devices that require up to 100W.

Small Cell

In this application example, High-Power small cell devices are deployed inside several buildings. A network switch with fiber ports is used to distribute a fiber link to OmniConverter media converters.

The OmniConverter GPoEBT/S media converters are capable of providing up to 100 watts on the RJ-45 ports.

The previous/old version of the GHPoEBT/S 60W are no longer in production. GHPoEBT/S models 9500B - 9519B are replaced with the enhanced models below.

Step 1: Choose a Base Part Number (xxxxN-x-ypt)

Step 2: Choose the number of RJ-45 ports (xxxxN-x-ypt)

Step 4: Choose an Operating Temperature Range (xxxxN-x-ypt)

The previous/old version of the GHPoEBT/S 100W are no longer in production. GHPoEBT/S models 9150B - 9169B are replaced with the enhanced models below.

Step 1: Choose a Base Part Number (xxxxN-x-ypt)

Step 2: Choose the number of RJ-45 ports (xxxxN-x-ypt)

Step 4: Choose an Operating Temperature Range (xxxxN-x-ypt)

Accessories

*MODEL COMPARISON