PoE Media Converter | OmniConverter FPoE PoE Media Converter | OmniConverter FPoE SFPs not included
OmniConverter® FPoE+/S Industrial Media Converter

Industrial 10/100 Media Converter with Power over Ethernet (PoE or PoE+) Enhanced Version*



Features


  • IEEE 802.3af/at multi-port Industrial Fast Ethernet Media Converter
  • Compact size
  • Dual Device mode for operating as two separate media converters
  • Directed Switch mode prevents flooding of multicast video traffic
  • Configurable PoE Power Reset
  • Uplink redundancy on models with two uplink ports
  • Two 100Mbps SFP or two 10/100 RJ-45 uplink ports
  • One ST or SC fixed Fast Ethernet fiber connectors
  • One or two 10/100 RJ-45 PoE/PoE+ user ports
  • Industrial (-40º to 75ºC) operating temperature ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support




Description


The OmniConverter FPoE+/S are industrial multi-port IEEE 802.3at PoE+ Ethernet media converters that feature one or two uplink ports and one or two 10/100 RJ-45 PoE+ user ports.

The FPoE+/S provides up to 30W PoE+ per RJ-45 user port and supports frame sizes up to 10,240 bytes. The uplink ports can be fixed fiber or SFP receptacle or 10/100 RJ-45 copper.

The OmniConverter FPoE+/S supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing the multicast video traffic from flooding other network ports.

Models with two fiber port support redundant fiber uplinks for critical applications that require protection and restoration in the event of a fiber failure. The second fiber port can also be used to cascade multiple media converters.

Models with two fiber ports also support Dual Device mode that enables the module to operate as two independent and isolated media converters. In Dual Device mode, the FPoE+/S provides separate and independent data traffic paths between the two uplink ports and two user ports.

Configurable features include link modes and a PoE power reset function that enables the attached PD device, such as a camera or access point, to be re-initialized remotely, eliminating the need for costly truck rolls to remote PD sites. When a problem with a PD is detected, the fiber port on the module can be disconnected, triggering the PoE power reset function.

Link modes can be configured to propagate loss-oflink faults to managed devices, immediately notifying administrators of network outages.

The FPoE+/S supports fixed fiber connectors or Small Form Pluggable (SFP) transceiver receptacles, enabling easy adaptability to different fiber types, distances and wavelengths. SFP models support 100Mbps standard, CWDM and DWDM transceivers in a variety of distances and fiber types.

The FPoE+/S can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19” rack-mount shelf. They are available with DC input power via terminal connectors or an external 100 to 240V AC power adapters.

 





Examples


Dual Device Mode Application

This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.

The example below depicts a scenario where a surveillance security (green) network and a Wi-Fi (purple) network are sharing a single hub distribution location. Using the two uplinks and the Dual Switch mode facilitates using a single PoE media converter driving both the Cameras and the WiFi Access Points while maintaining isolation between the networks.

Dual Device App FPoE indusrtial

 

Daisy Chain Application

This example demonstrates the daisy chain capabilities of the OmniConverter media converters. In this application each media converter connects to its neighboring converter via its uplink ports. The daisy chain can continue to additional converter using this method of connectivity.

Each OmniConverter media converter provides connectivity to the fiber links, and power to IP cameras and Wi-Fi access points at each location along the daisy chain.

Daisy Chain App FPoE industrial

 





Specifications


Description

OmniConverter FPoE+/S

10/100BASE-T to 100BASE-X Fiber Media Converter with PoE+
Standard Compliances

IEEE 802.3,

IEEE 802.3af (15.40 watts), IEEE 802.3at (30 watts)

Regulatory Compliances

(Pending)

Safety:  UL 62368-1, UL 60950-1,

             IEC 62368-1, IEC 60950-1,

              EN 62368-1, EN 60950-1,

             CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

             CE Mark,

             UKCA

EMC:    EN 55032/24 CE Emissions/Immunity,

             IEC 61000-6-4 Industrial Emissions,

             IEC 61000-6-2 Industrial Immunity

EMI:    CISPR 32,

            FCC 47 Part 15 Subpart B Class A

EMS:   IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

            IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m,

            IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models),

            IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),

            IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models),

            IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models),

            IEC 61000-4-6 CS: Signal: 10 V,

            IEC 61000-4-8 (Magnetic Field) 30A/m,

            IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: IP30D Protection

ACT: TAA, BAA,NDAA
Environmental REACH, RoHS and WEEE
PoE Power Modes IEEE Alterative A (Alt A)
Frame Size Up to 10,240 bytes
Port Types

Copper: 10/100BASE-T (RJ-45)

Fiber:     100BASE-X (ST, SC, SFP)
Cable Types

Copper: EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber:     Multimode: 50/125, 62.5/125µm

              Single-mode: 9/125µm
AC Power Requirements
(Models with AC/DC Adapters)

1 RJ-45 Port:

100 - 240VAC/50 to 60Hz, 0.33A @ 120VAC (typical)

2 RJ-45 Ports:

100 - 240VAC/50 - 60Hz, 0.62A @ 120VAC (typical)
DC Power Requirements
(Models with DC Terminals)

1 RJ-45 Port:

+/-46 to +/-57VDC,

0.78A @ 56VDC

2 Pin Terminal (isolated)

2 RJ-45 Ports:

+/-46 to +/-57VDC,

1.45A @ 56VDC

2 Pin Terminal (isolated)
A minimum DC input voltage of 50VDC is required to guarantee 25.5 watts (for 802.3at) at the end of 100 meters on Cat 5 cable or better.
Dimensions (W x D X H) 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm)
Weight

Module Only: 1.0 lbs. (453.6 grams)

Module w/ Adapter: 1.9 lbs. (852.6 grams)
Operating Temperature
(See Temerature Derating Table)

Extended: -40 to 75°C (-20°C AC cold start)

Storage: -40 to 80°C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs)

Module: 584,000

AC/DC Adapter: 100,000
Warranty Lifetime warranty with 24/7/365 free Technical Support

 

 

Power / Voltage Requirements and Specifications per IEEE

Description IEEE 802.3af PoE IEEE 802.3at PoE+
Power Supply Voltage Range 46.0 to 57.0 VDC 51.0 to 57.0 VDC
Voltage Range at PSE port Output 44.0 to 56.0 VDC 50.0 to 56.0 VDC
Maximum Power from PoE/PSE port 15.4 watts 30 watts
Minimum Voltage at PoE/PD port input* 37.0 VDC 42.5 VDC
Minimum Power at PoE/PD port* 12.95 watts 25.5 watts




Ordering


The previous/old version of the Industrial FPoE/S and FPoE+/S are no longer in production. Industrial FPoE/S models 9300 - 9319 and FPoE+/S 9320 - 9339 are replaced with the enhanced models below.

 

Step 1: Choose a Base Part Number (xxxxN-x-ypZ)

Fiber TypeDistanceConnector Type

Tx / Rx

Lambda

(nm)

Min. Tx

Power

(dBm)

Max. Tx

Power

(dBm)

Min. Rx

Power

(dBm)

Max. Rx

Power

(dBm)

Min

Attenuation

(dB)

Link

Budget

(dB)

STSCSFPRJ-45
MM/DF 5km 9320N-0-ypZ 9322N-0-ypZ - - 1310/1310 -24 -14 -31 -14 - 7
SM/DF 30km 9321N-1-ypZ 9323N-1-ypZ - - 1310/1310 -15 -8 -31 -8 - 16
SM/DF 60km 9321N-2-ypZ 9323N-2-ypZ - - 1310/1310 -5 0 -31 -3 3 26
SM/DF 120km - 9323N-3-ypZ - - 1550/1550 -5 0 -31 -3 3 26
MM-SF1 5km - 9330N-0-ypZ - - 1310/1550 -8 0 -28 0 - 20
MM-SF1 5km - 9331N-0-ypZ - - 1550/1310 -8 0 -28 0 - 20
SM-SF1 20km - 9330N-1-ypZ - - 1310/1550 -15 -5 -30 -3 - 15
SM-SF1 20km - 9331N-1-ypZ - - 1550/1310 -15 -5 -30 -3 - 15
SM-SF1 40km - 9330N-2-ypZ - - 1310/1550 -8 0 -30 -3 3 22
SM-SF1 40km - 9331N-2-ypZ - - 1310/1310 -8 0 -30 -3 3 22
RJ-45 (x1) 100m - - - 9338N-0-ypZ - - - - - - -
RJ-45 (x2) 100m - - - 9338N-0-ypZ - - - - - - -
SFP (x1) - - - 9339N-0-ypZ - - - - - - - -
SFP (x2) - - - 9339N-1-ypZ - - - - - - - -
1 When using single-fiber (SF) models, the Tx wavelength on one end has to match the Rx wavelength on the other.
MM = Multimode, SM = Single-mode, DF = Dual Fiber, SF = Single-fiber
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Optical Transceivers web page.
Contact Omnitron for conformal coating options.

Step 2: Choose the number of RJ-45 ports (xxxxN-x-ypZ)

1 = One RJ-45 Ports
2 = Two RJ-45 Ports

Step 3: Choose a Power Option (xxxxN-x-ypZ)

1 = External AC/DC Adapter, 100 - 240 VAC included, with US Power Cord
2 = External AC/DC Adapter, 100 - 240 VAC included, No Power Cord
8 = External AC/DC Adapter, 100 - 240 VAC included, PS JET/PSE Certified, with Japanese Power Cord
9 = Direct DC 2 pin terminal connector, no AC/DC power adapter

Operating Temperature Range Option

Z = Extended temperature (-40 to 75°C) - Check the Derating  Table for available wattage for models with AC/DC Power Adapter

 

AC/DC Adapter Temperature Derating
Total Available Wattage to RJ-45 Ports
 Model RJ-45 Ports Watts Required

Watts Available

@40°C

Watts Available

@50°C

Watts Available

@60°C

Watts Available

@70°C

Watts Available

@75°C
FPoE+/S 1 30 watts Full Power Full Power Full Power Full Power Full Power
2 60 watts Full Power Full Power Full Power Full Power 50 watts
The AC/DC Adapter Temperature derating table is not applicable to models with DC Terminal (see Ordering table for Direct DC power option 9). The DC Terminal models will provide full PoE power over the operating temperature range of the module as long as the DC input voltage meets the requirements stated in the specification table.

 

 

Accessories

Model Number
Description
8250-0
DIN-Rail Mounting Bracket
8251-0
DIN-Rail Mounting Clip
8260-0
19" rack mount shelf

 

*MODEL COMPARISON

Previous/Old Base Model #Previous/Old Model Enhanced Base Model #Enhanced Model
9300 FPoE/S 15 W per RJ-45 User Port 9320N FPoE+/S 30 W per RJ-45 User Port
9320 FPoE+/S 30 W per RJ-45 User Port

 

Features

Previous/Old Model

FPoE/S and FPoE+/S

Enhanced Model

FPoE+/S

Benefits
Copper Uplink Ports N/A One or two ports Product flexibility
Dimensions (W x D x H)

4.5” x 6.0” x 1.0”

 3.8” x 4.8” x 1.0” Compact size
PoE Power Level

IEEE 802.3af - FPoE/S

IEEE 802.3af/at - FPoE+/S

IEEE 802.3af/at

 15W and 30W versions in one model
Dual Device Mode N/A Models with dual uplink ports Two independent and isolated Ethernet media converters
Directed Switch Mode N/A ✓ Prevents multicast (video) traffic from flooding other network ports
Legacy pre-IEEE Power Standards ✓ Alternative A Power Mode No configuration for the user
IP Protection IP20 IP30D Provides increased enclosure protection


back to top