Managed Industrial 6-Port 60/100W IEEE 802.3bt Gigabit Switches

The RuggedNet GHPoEBT/Mi replaces the GHPoE/Mi and is recommended for all new designs.

• Managed High-Power 60W/100W PoE Gigabit Ethernet Switches with single or dual DC power
• GHPoEBT/Mi supports the IEEE 802.3bt 60W or 100W
• Two 10/100/1000 copper or Gigabit fiber uplink ports
• Four 10/100/1000 copper PoE user ports
• ST, SC and LC fixed fiber ports or standard, CWDM or DWDM Gigabit SFP transceivers
• Supports jumbo frames up to 10,240 bytes
• Heartbeat signal to verify connectivity to the PD
• Configurable PoE Power Reset
• PoE power management with LLDP MED and MDI TLV, and PoE Power Multi-Day Scheduler
• Management via Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
• Easy to use Hierarchical Command Line Interface
• SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
• Supports IPv4 and IPv6
• IEEE 802.1x, RADIUS, TACACS+ and ACL
• Email Notification
• Dual Device mode for operating as two separate switches
• Directed Switch mode AKA Camera mode to prevent port flooding
• Industrial (-40 to 75º C) operating temperature
• TAA, BAA and NDAA compliant, and Made in the USA
• Free 24/7/365 Technical Support

Additional Features

• Rapid and Multiple Spanning Tree Protocol
• IEC 62439-2 Industrial Ring Media Redundancy
• IEEE 802.1ax LAG and LACP; Active/Active and Active/Standby
• IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
• DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
• IEEE 802.1ab Link Layer Discovery Protocol
• Rate Limiting, Queue prioritization and Class of Service
• IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
• Static MAC configuration and blocking of unknown Unicast/Multicast addresses
• Port Access Control for enhanced security
• Broadcast / Multicast / Unicast Storm Prevention
• SNTP / NTP and time of day

The RuggedNet GHPoEBT/Mi are industrial ruggedized and temperature-hardened managed Layer 2 Ethernet switches that feature fiber or copper uplink ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet user ports.

The GHPoEBT/Mi is an IEEE 802.3bt switch featuring 60W and 100W per user port models.

All models support Directed Switch mode, which directs multicast traffic, such as video, to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

Models with two fiber or two copper uplink ports support redundant uplinks, industrial ring Media Redundancy Protocol (MRP), Rapid Spanning Tree Protocol (RSTP) and daisy-chain configurations for high availability industrial network applications.

Models with two fiber or two copper uplink ports also support Dual Device mode that enables the switches to operate as two independent and isolated Ethernet switches.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided.

The RuggedNet PoE switches are available with fixed fiber ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver ports. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140km. SFP models support a variety of distances in standard, CWDM and DWDM wavelengths.

The switches feature a Remote PoE Power Reset function that enables the user to remotely power-cycle and reset each PD. They also feature a configurable Heartbeat Reset function that automatically pings the attached PDs and automatically power cycles and resets the PDs when detecting a heartbeat loss. These functions save time and expense by eliminating the need to dispatch manpower to remote network sites.

An alarm relay is available to detect user configured events. The relay contact can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.

Dual Device Mode Application

This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.

The example below depicts a scenario where a surveillance security (purple) network and a Wi-Fi (green) network are sharing a single hub distribution location. Using the two uplinks and the Dual Switch mode facilitates using a single PoE switch driving both the Cameras and the Wi-Fi Access Points while maintaining isolation between the networks.

Daisy-Chain and Ring Topology Network Application

This example demonstrates the daisy chaining and ring capabilities of the OmniConverter. In this application each OmniConverter switch connects to its neighboring switches via its uplink ports eventually closing the ring.

Using this network architecture combined with ring protection protocols such as Media Redundancy Protocol (MRP) or Rapid Spanning Tree Protocol (RSTP) facilitates a highly resilient network required in mission critical applications.

Power / Voltage Requirements and Specifications per IEEE

Step 1: Choose the Base Part Number (xxxx-x-xx-pZ)

Step 2: Choose the Power Option (xxxx-x-xx-pZ)

Operating Temperature Range

Step 2: Choose the Power Option (xxxx-x-xx-pZ)

Operating Temperature Range

Model Number	Description
8260-3	Wall Mounting Plate
8260-0	19" rack mount shelf

Power Supply Selection Guide