Carrier Ethernet 2.0 Certified 8-Port Gigabit NID

• MEF Carrier Ethernet 2.0 Certified 8-Port Gigabit NID
• Integrated IPv4, IPv6, SNMPv1/v2c/v3, SSH, Telnet and IP-less 802.3ah OAM management
• SNMP management via NetOutlook® Network Management software
• Multiple port configurations:
  • 8 Gigabit SFPs or
  • 4 100/1000 SFP and 4 10/100/1000 RJ-45 copper or
  • 2 100/1000 SFP and 6 10/100/1000 RJ-45 copper or
  • 8 10/100/1000 RJ-45 copper
• Supports dual fiber and single-fiber SFP transceivers for standard, CWDM or DWDM wavelengths
• RJ-45 port supports 10/100/1000 and Half/Full-Duplex auto-negotiation and MDI/MDIX auto-crossover
• 10,056 byte Jumbo frames
• Advanced traffic management with service mapping, traffic policing and shaping with Hierarchical Rate Limiting
• IEEE 802.1ag Connectivity Fault Management
• ITU-T Y.1731 End-to-End Performance Monitoring
• RFC 5357 TWAMP responder and initiator
• Zero-Touch Provisioning
• ITU-T Y.1564 Ethernet Service Activation Testing
• IETF RFC 2544 Ethernet Service Activation Testing
• ITU-T G.8262 Sync-E and IEEE 1588v2 Timing
• ITU-T G.8031 and G.8032v2 Ethernet Protection Switching
• IEEE 802.1ax/802.3ad LAG with LACP
• Available with redundant AC or DC power inputs
• TAA, BAA and NDAA Compliant, and Made in the USA
• Commercial (0 to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75º C) temperature ranges

The iConverter® XM5-1G is a Gigabit Network Interface Device (NID) that provides service demarcation and aggregation for Carrier Ethernet 2.0 services. The XM5-1G provides comprehensive support of the latest carrier-class Ethernet Service OAM, testing and protection standards. These advanced capabilities enable rapid service deployments, Service Level Agreement (SLA) assurances, comprehensive fault management and service protection to reduce operating costs and improve customer satisfaction.

The XM5-1G features a combination of Gigabit SFP ports and 10/100/1000 RJ-45 ports for UNI or NNI deployments to deliver wholesale Ethernet, 4G/LTE mobile backhaul, business and cloud services

The XM5-1G supports MEF-certified User-to-Network Interface (UNI) functions including Class of Service (CoS) management, granular rate-limiting, and 802.1ad Provider Bridge VLAN stacking (Q-in-Q) for service multiplexing of multiple E-Line, E-LAN and E-Tree services. The XM5-1G provides flexible per-flow service mapping, traffic policing and shaping. CIR/EIR “two rates, three colors” ingress port policing provides the granular bandwidth optimization required for CE 2.0 services such as Business Ethernet Services and Mobile Backhaul. The XM5-1G also provides advanced classification and filtering of subscriber traffic as an EVC or CoS flow based on Layer 1, 2, 3 or 4 identifiers.

The XM5-1G supports carrier-class Ethernet Service OAM standards. IEEE 802.1ag Connectivity Fault Management (CFM) proactively monitors service availability and provides tools for rapid fault isolation. ITU-T Y.1731 Performance Monitoring provides the ability to monitor key SLA parameters including frame delay, frame delay variation and frame loss.

The XM5-1G supports ITU-T Y.1564 and RFC 2544 service testing to easily verify the configuration and performance of Ethernet services prior to customer hand off. RFC 2544 provides per flow testing of Key Performance Indicators (KPI), such as throughput, latency, jitter and frame loss up to full wire speed. Y.1564 is a comprehensive Carrier Ethernet testing standard that tests all data flows and service attributes, including multi-flow Information Rate and Traffic Policing.

The XM5-1G supports ITU-T G.8031 Ethernet Linear Protection Switching and G.8032v2 Ethernet Ring Protection Switching with Connectivity Check Messages (CCM) at 3.3ms rate for sub-50ms protection switching. G.8032v2 includes multi-ring protection and sub-ring support.

Zero-Touch Provisioning (ZTP) allows providers to achieve efficiencies in service activation that accelerate turn up and reduce the need for on-site technicians. ZTP allows service provisioning to be centralized, standardized and remotely managed.

The integrated management eliminates the cost and space required for external management hardware. The integrated management provides comprehensive remote configuration and performance monitoring.

The XM5-1G supports IPv4 and IPv6 addressing, IP-Less protocol using the IEEE 802.3ah OAM channel or using SNMPv1/v2c/v3, SSH, Telnet or serial console port.

The IP address is user-defined or can be resolved through DHCP. Telnet and serial console (CLI) management interfaces are also supported, and utilize an easy-to-use, menu-driven interface. The CLI interface provides local configuration access.

SNMP management is available via Omnitron’s NetOutlook® SNMP Network Management Software with an intuitive Graphical User Interface, or third party SNMP software.

The XM5-1G is available with single or dual DC power terminals, or available with an external AC to DC power adapter. Built-in mounting brackets provide table-top and wall-mounting capability, and can also be rack-mounted using the 1U 19” or 23” rack-mounting shelf.

The XM5-1G can be deployed to deliver a variety of Gigabit and Fast Ethernet services, and simplifies operations by reducing the need to inventory multiple NID models. Fast Ethernet SFPs can be installed in the Gigabit ports to provide a seamless upgrade path to future Gigabit services.

In this application example, an iConverter XM5 10G Aggregation Demarcation Device is deployed as an Carrier Ethernet aggregation node on a 10G fiber ring. iConverter XM5-1G NIDs terminate the Gigabit fiber links and provide 100Mbps service demarcation at cell towers and customer premise.

The XM5-1G NIDs provide comprehensive support of Carrier Ethernet performance monitoring, fault management, timing and protection standards to enable rapid service deployments and service assurance.

For 10G applications with the same advanced features, see the iConverter XM5 NID.

Step 1: Choose a Base Part Number (964y-xx-ppt)

Accessories