Subscribe to this RSS feed
iConverter

iConverter (74)

The iConverter platform consists of media converters, Network Interface Devices, CWDM and T1/E1 multiplexers and CWDM multiplexers available in standalone and chassis plug-in modules. The plug-in modules can be installed in any iConverter chassis equipped with other iConverter modules. This flexible architecture provides a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across fiber links or combining services over a CWDM common fiber link. 

Learn More

Monday, 24 January 2011 13:52

iConverter® 4Tx

Written by
4 Port 10/100 Switch Module | iConverter 4Tx

4-Port 10/100BASE-TX Managed Ethernet Switch

The iConverter 4Tx 10/100 Ethernet Switch module is a member of the managed iConverter product family. The 4Tx provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a standalone switch with the iConverter 1-Module Chassis.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 13:42

iConverter® 2Fx

Written by
Fast Ethernet Fiber to Fiber Converter and Switch | iConverter 2Fx

100BASE-FX to 100BASE-FX Managed Fast Ethernet Media Converter & Switch

The iConverter 2Fx managed media converter is a member of the modular iConverter product family. The 2Fx provides a cost effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and re-times the fiber optic signal, and multiple 2Fxs can be used to extend total network distances.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 13:19

iConverter® Tx/2Fx and Tx/2Tx

Written by
iConverter® Tx/2Fx and Tx/2Tx

Redundant Fast Ethernet Fiber and UTP Managed Ethernet Media Converters

The iConverter Redundant Fast Ethernet modules are designed for use in networks that require fiber or copper link redundancy. With a link fault detection time of 100 microseconds, the Redundant iConverter modules provide the rapid response time required for mission-critical applications. All ports support Half or Full-Duplex operation, and the UTP ports can auto-negotiate or be manually set to a required duplex mode.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 19:23

iConverter® 10/100

Written by
iConverter® 10/100

10BASE-T or 100BASE-TX to Fast Ethernet Managed Media Converter

The iConverter 10/100 managed media converters are members of the modular iConverter product family, and provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.The iConverter 10/100 modules are available with multimode, single-mode and single-fiber options, and support ST, SC and LC connectors.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 11:17

iConverter® 100Fx/Tx

Written by
iConverter® 100Fx/Tx

100BASE-TX to 100BASE-FX Managed Ethernet Media Converter

The iConverter 100Fx/Tx managed media converters are members of the modular iConverter product family, and provide 100BASE-TX UTP to 100BASE-FX fiber conversion. The iConverter 100Fx/Tx models are available with multimode, single-mode and single-fiber options. They support ST, SC and LC connectors. The UTP port supports 100BASE-TX in either Full or Half-Duplex mode.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 11:10

iConverter® 10T/2

Written by
Media Converter | iConverter 10T/2

10BASE-T to 10BASE-2 Managed Ethernet Media Converter

The iConverter 10T/2 is a 10BASE-T to 10BASE-2 media converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The iConverter 10T/2 facilitates the connection of a coax segment to a 10BASE-T hub.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Tuesday, 25 January 2011 02:52

iConverter® 10FL/T

Written by
10mbps Media Converter | iConverter 10/FLT

10BASE-T to 10BASE-FL Managed Ethernet Media Converter

The iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T UTP to 10BASE-FL fiber conversion. The iConverter 10FL/T models are available with multimode, single-mode and single-fiber options. They support ST, SC and LC connectors.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 10:46

iConverter® 1U Rack-Mount Shelf

Written by
iConverter® 1U Rack-Mount Shelf

19” Rack Mount for Select iConverter Chassis and Standalone Modules

The 1U 19" Rack-Mount Shelf accommodates iConverter standalone Network Interface Devices and media converters, the iConverter 1-Module chassis and the iConverter 2-Module chassis.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 10:37

DIN Rail Mounting Options

Written by
DIN Rail Mounting Options

DIN Rail Wall Mounting Kits and Clips for Omnitron Products

The Omnitron Universal DIN Rail Mounting Bracket model 8250-0 is designed to provide DIN Rail capabilities for the FlexPoint converter, FlexPoint converter with DC Adapter, iConverter Standalone and iConverter 1-module chassis.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Monday, 24 January 2011 10:30

iConverter® 1-Module Redundant Power Chassis

Written by
iConverter® 1-Module Redundant Power Chassis

with Power-over-Ethernet (PoE/PD) Option

The iConverter 1-Module Redundant Power Chassis is ideal for mission-critical Customer Premises (CP) Ethernet services, and in applications where the monitoring of external events is required.

Published in iConverter
Tagged under
Be the first to comment!
Read more...
Page 5 of 6