Gigabit Fiber-to-Fiber Managed Converter/Transponder

• Fiber-to-fiber converter/transponder supporting:
  • Multimode dual fiber to single-mode dual fiber
  • Multimode dual fiber to single-mode single-fiber
  • Single-mode dual fiber to single-mode single-fiber
  • Wavelength conversion
• Conforms to IEEE 802.3 and 1000BASE-X specifications
• Module supports a constant rate signal from 500Mbps to 1250Mbps
• Supports multimode and single-mode dual fiber; and single-mode single-fiber with SC connectors
• User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
• LED displays for immediate visual status of each port
• Plug-in modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
• Management is available with the addition of a management module to the chassis
• SNMP management via NetOutlook® provides real-time port and module status information, configuration and trap notification
• Commercial (0 to 50°C) and wide (-40 to 60°C) temperature ranges
• TAA, BAA and NDAA compliant, and Made in the USA
• Lifetime Warranty and free 24/7 Technical Support

The iConverter 1000FF is a Gigabit Ethernet fiber-to-fiber converter/transponder available as a compact, unmanaged standalone unit or a managed chassis plug-in module. The iConverter 1000FF provides a cost-effective solution to extend fiber network distances with multimode to single-mode, dual fiber to single-fiber, and wavelength (850/1310, 850/1550 and 1310/1550) conversion.

The 1000FF support a constant data rate signal between 500Mbps to 1250Mbps allowing the converter to be used in Ethernet networks as well as other fiber-to-fiber protocol applications. Both ports operate at the same date rate.

iConverter 1000FF models support multimode and single-mode dual fiber; and single-mode single-fiber with SC connectors.

The 1000FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.

iConverter 1000FF media converters are available as compact, unmanaged standalone units, or chassis plug-in modules that can be managed with a Management Module (NMM2) or Network Interface Device (NID) installed in the chassis. The management module provides access to all the advanced features on the module.

The management software can override the physical DIPswitch settings such as link modes. Some of the real-time 1000FF parameters that can be monitored include power, link, data activity status, module type and model, hardware and software revisions, serial numbers and a user-defined identifier.

The 1000FF standalone models are available with an external AC to DC power adapter or with a 2-pin terminal connector for direct connection to DC power. The standalone module can be DIN-Rail mounted using the optional DIN-Rail mounting clips (8251-0).

The hot-swappable plug-in module can be mounted in a 19 or 5-Module iConverter chassis with redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.

The iConverter Multi-Service Platform consists of Network Interface Devices, T1/E1 multiplexers, CWDM/DWDM multiplexers and managed media converters that combine to deliver Carrier Ethernet and TDM services over fiber or CWDM/DWDM wavelengths. This flexible architecture supports a wide variety of configurations for scalable and reliable fiber connectivity in Service Provider and Enterprise networks.

Networks often require conversion from multimode to single-mode fiber, which supports longer distances. In this application, two Ethernet switches equipped with multimode fiber ports are connected utilizing a pair of fiber-to-fiber converters which convert the multimode fiber to single-mode and enable network connectivity across the distance between the switches.

Step 1: Choose a Base Part Number (xxxx-x-pt)

Step 2: Choose a Power Option (xxxx-x-pt)

Step 3: Choose an Operating Temperature Range (xxxx-x-pt)

Accessories