Network Interface Devices
iConverter Ethernet Network Interface Devices (NID) provide carrier-grade Ethernet demarcation for business services. These MEF certified NIDs support 802.1ag Service OAM, Y.1731 performance monitoring and 802.3 Link OAM to support Service Level Agreements.
T1/E1 Multiplexers
iConverter T1/E1 Multiplexer products transport multiple T1/E1 copper circuits and a 10/100/1000 Ethernet service over a fiber optic link. Overcome the distance limitations of copper and aggregate legacy TDM services over long distances for mobile backhaul and building-to-building PBX connectivity.
CWDM Multiplexers
iConverter CWDM multiplexers and OADMs increase the bandwidth capacity of dual fiber and single-fiber networks. These compact CWDM MUX modules utilize a small and scalable plug-in form factor, with some of the highest port densities in the industry.
Managed Media Converters
iConverter media converters and transponders provide connectivity between different cabling types and wavelengths with advanced networking features to enable next-generation services. These intelligent converters support a wide variety of protocols, data rates and chassis configurations for flexible and scalable deployments.
iConverter Copper-to-Fiber Media Converters
iConverter Fiber-to-Fiber Media Converters
Media Converters with PoE
OmniConverter PoE media converters provide copper-to-fiber conversion and inject Power-over-Ethernet (both PoE and PoE+). A variety of port configurations are available, including dual SFP and RJ-45 ports. OmniConverter PoE media converters enable fiber links to locations with AC or DC power, where PoE via UTP powers IP cameras, Wi-Fi Access Points and desktop devices.
Unmanaged Media Converters
FlexPoint copper-to-fiber and fiber-to-fiber media converters provide unmanaged fiber connectivity between different cabling types. The self-contained converter modules can be used as standalone units, rack-mounted or installed in a powered chassis.
Miniature Media Converters
miConverter miniature Ethernet media converters provide cost-effective integration of copper network devices and fiber network cabling. These compact converter modules can be powered by an external AC power supply or a USB port for fiber-to-the-desktop/laptop deployments.
iConverter Multi-Service Platform
The iConverter platform of media converter, transponder and multiplexer modules can be combined in a variety of chassis configurations. This flexible architecture enables the delivery of different services, protocols and data rates over existing fiber infrastructure.
New Products
Network Interface Device with Service OAM
The iConverter GM3 Ethernet Network Interface Device (NID) provides MEF 9, 14 and 21 certified Ethernet service demarcation. The GM3 supports the latest Carrier Ethernet standards covering Link OAM (802.3ah) and end-to-end Service OAM (802.1ag and Y.1731), enabling the delivery of reliable services and SLA assurance across multiple carrier networks. The three-port GM3 features dual Fiber ports or dual copper ports, and supports fix fiber connectors, or SFPs available in Gigabit (1000BASE-X) or Fast Ethernet (100BASE-FX). The GM3 is available as a standalone device or
a chassis plug-in module.
T1/E1 Multiplexers
The iConverter T1/E1 MUXes multiplex up to sixteen T1/E1 copper circuits and 10/100/1000 Ethernet onto a fiber optic link. The iConverter T1/E1 MUXes operate in pairs, and are designed for T1/E1 extension, building to building PBX connectivity and mobile backhaul applications.
PoE Injector Media Converters
Leverage the benefits of fiber and Power-over-Ethernet (PoE) with the new OmniConverter fiber to UTP media converter. The OmniConverter is the first media converter on the market with models that support the IEEE 802.3af PoE standard (15.4W of power) and the new IEEE 802.3at PoE+ standard (25.5W of power). OmniConverter media converters support a variety of port configurations and can provide power to one or two PoE devices.
10 Gigabit Media Converter and Transceiver
The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports, supporting any combination of SFP+ and XFP (fiber and CX4 copper) transceivers. The iConverter XG supports 100% traffic throughput with no packet size restrictions, and supports 10 Gigabit Ethernet, 10G SONET/SDH, 10G Fibre Channel and 10G OTN (G.709). It can function as copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater.
Archived Webinars
Ethernet Service OAM for SLAs in Multi-operator Networks - A USTelecom Webinar
View this archived webinar
Live Events
BICSI Fall Conference and Exhibition
Las Vegas, NV - September 12-16
COMPTEL PLUS Fall
Dallas, TX - September 12-14
IIR Carrier World Ethernet Congress
Warsaw, Poland - September 20-23
LIGHTWAVE: Optical Networks for Enterprises
Los Angeles, CA - October 4-6
Resource Centers provide access to free white papers, design tutorials, videos and case studies on Omnitron fiber connectivity solutions.
Carrier Ethernet Resource Center
Learn how Network Interface Devices that support end-to-end Service OAM enable reliable and profitable Ethernet services for business and mobile backhaul.
Media Converter Resource Center
Learn how Omnitron media converters enable connectivity between different cabling types and network devices, and provide advanced networking tools to deliver next-generation services.
CWDM Resource Center
Learn how to increase network capacity with Course Wavelength Division Multiplexing to deliver more services and bandwidth over existing fiber infrastructure.
1.15.10 - Omnitron Donating to Red Cross for Haiti Relief Efforts
11.2.09 - Omnitron Launches Power over Ethernet Gigabit Media Converter
10.12.09 -Omnitron’s iConverter Network Interface Devices Receive MEF 21 Certification
4.20.09 - Omnitron Launches 10 Gigabit Media Converter
3.9.08 - Omnitron Launches iConverter 4-Port T1/E1 MUX
12.18.08 - Omnitron Launches New iConverter Network Interface Devices
10.13.08 - Omnitron Announces New CWDM Solutions
9.29.08 - Omnitron Launches miConverter GX/T
8.11.08 - Omnitron’s iConverter Products Achieve Solaris Ready Compatibility
