6 and 10 Port Industrial Managed 10G Ethernet Switches

Omnitron’s 6 and 10-Port Industrial 10G Managed PoE Switches Features

• Managed Industrial 1/10G PoE/PoE+ Ethernet Switch with dual DC powerTwo 1/10G SFP/SFP+ transceiver uplink ports
• Supports copper and fiber SFP transceivers
• Supports 10M, 100M, 1G and 10Gbps copper SFP/SFP+ transceivers
• Four or eight 10/100/1000 copper PoE user ports
• Jumbo frames up to 10,240 bytes
• Heartbeat signal to verify connectivity to the PD
• Configurable PoE Power Reset
• PoE power management with LLDP MED and MDI TLV, and PoE Power Multi-Day Scheduler
• Management via Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
• Easy to use Hierarchical Command Line Interface
• SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
• Supports IPv4 and IPv6
• IEEE 802.1x, RADIUS, TACACS+ and ACL
• Email Notification
• Dual Device mode for operating as two separate switches
• Directed Switch mode AKA Camera mode to prevent port flooding
• Alarm contacts and sensors
• Wall, Rack and DIN-rail mountable
• Industrial (-40 to 75º C) operating temperature
• TAA, BAA and NDAA compliant, and Made in the USA
• Free 24/7/365 Technical Support

ADDITIONAL FEATURES

• Rapid and Multiple Spanning Tree Protocol
• IEC 62439-2 Industrial Ring Media Redundancy
• IEEE 802.1ax LAG and LACP; Active/Active and Active/Standby
• IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
• DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
• IEEE 802.1ab Link Layer Discovery Protocol
• Rate Limiting, Queue prioritization and Class of Service
• IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
• Static MAC configuration and blocking of unknown Unicast/Multicast addresses
• Port Access Control for enhanced security
• Broadcast / Multicast / Unicast Storm Prevention
• SNTP / NTP and time of day

6 and 10-Port Industrial 10G Managed PoE Switches Overview

The RuggedNet 10GPoE+/Mi is a ruggedized managed PoE and PoE+ industrial Ethernet switch that features two 1/10G uplink ports and four or eight 10/100/1000 RJ-45 PoE/PoE+ user ports.

The RuggedNet 10GPoE+/Mi is a Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.

All Omnitron’s 6 and 10-port industrial 10G managed PoE switches support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

The switches support redundant uplinks, industrial ring Media Redundancy Protocol (MRP), Spanning Tree protocol and daisy-chain configurations for high availability industrial network applications.

The switches support Dual Device mode that enables the 10GPoE+/Mi to operate as two independent and isolated Ethernet switches.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided.

The RuggedNet PoE switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or singlefiber and standard, CWDM and DWDM wavelengths.

The Omnitron’s 6 and 10-port industrial 10G managed PoE switches feature a Remote PoE Power Reset function that enables the user to remotely power-cycle and reset each PD. They also feature a configurable Heartbeat Reset function that automatically pings the attached PDs and automatically power cycles and resets the PDs when detecting a heartbeat loss.

An alarm relay is available to detect user configured events. The relay contact can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.

All models can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with dual DC input power.

6 and 10-Port Industrial 10G Managed PoE Switches Applications

Daisy-Chain and Ring Topology Network Application

This example demonstrates the daisy chaining and ring capabilities of the RuggedNet. In this application each RuggedNet switch connects to its neighboring switches via its uplink ports eventually closing the ring.

Using this network architecture combined with ring protection protocols such as Media Redundancy Protocol (MRP) or Rapid Spanning Tree Protocol (RSTP) facilitates a highly resilient network required in mission critical applications.

Dual Device Mode Application

This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.

The example below depicts a scenario where a surveillance security (purple) network and a Wi-Fi (green) network are sharing a single hub distribution location. Using the two uplinks and the Dual Switch mode facilitates using a single PoE switch driving both the Cameras and the Wi-Fi Access Points while maintaining isolation between the networks.

6 and 10-Port Industrial 10G Managed PoE Switches: Detailed Product Specifications

How to Order Your Industrial 10G Managed PoE Switch

Complete the ordering form and we will expedite a quote through one of our approved distributors.

RuggedNet 10GPoE+/Mi Models
Model Number	Description
9582-0-24-2Z	RuggedNet 10GPoE+/Mi 2 x SFP/SFP+ uplink port and 4 x RJ-45 PoE/PoE+ ports, Dual DC Terminal Connectors, Industrial Temperature
9582-0-28-2Z	RuggedNet 10GPoE+/Mi 2 x SFP/SFP+ uplink port and 8 x RJ-45 PoE/PoE+ ports, Dual DC Terminal Connectors, Industrial Temperature
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. web page.

 

Accessories
Model Number	Description
8260-3	Wall Mounting Plate
8260-0	19" rack mount shelf